For a new deer rifle, go to an old cartridge

Consider the .25-06, a century old cartridge, if you’re getting ready to look for your next deer rifle. It might just be the best purchase you ever make.

The dog days of summer are upon us — lots of sportsmen and women are spending time power-trolling for crappie, punching through grass beds for big bass, fishing deep for killer cats or dreaming of late-summer alligator hunting.

Other sportsmen, like die-hard deer hunters, have other things on their mind.

It’s the best time of year to buy that perfect, new deer rifle you’ve always dreamed of — you know, the one that never misses, puts them down in their tracks and doesn’t leave a bruise on your shoulder.

Does it exist? You bet it does. This time-proven quarter-bore, the .25-06, has been around for a century and could be the right rifle for you.

History

Remington offers the traditional Model 700 in .25-06, and it offers upgrades like the Model 700 Long Range with a Bell & Carlson stock, aluminum bedding block and 26-inch heavy contour barrel.

The .25-06, aka quarter-bore, came into being a little more than 100 years ago, in 1912, when Charles Newton necked-down the .30-06 Springfield cartridge to accept a .25-35 Winchester bullet. It was a wildcat cartridge for half a century, meaning that rifles were custom builds and ammo couldn’t be bought off the shelf;,it had to be hand-loaded.

Things changed in 1969 when Remington started producing its Model 700 rifle in .25-06, along with ammo. It was marketed and quickly became known as “the western cartridge” due to its effectiveness on deer and antelope in open country.

Why buy?

Lincoln County’s Matt Shell took out this gray fox using his .25-06.

The .25-06 is a hunter’s cartridge and was developed to kill deer-sized game with authority out to 400 yards. Many professional hunters worldwide consider it the perfect killing cartridge, possibly due to the combination of high velocity, good bullet weight and low recoil.

“I bought my .25-06 in 1989; it was a used gun, and I got it from a friend,” said Matt Shell of Brookhaven. “I like it because of the flat trajectory and low recoil. It’s also extremely accurate.”

There is a lot of hype and attention given today to newer and long-range calibers such as the 6.5 Creedmoor, causing the old quarter-bore to fly under the radar. The .25-06 isn’t a magnum cartridge, and isn’t a 1,000-yard shooter for plinking steel. It is, however, a killing machine and, make no mistake, it delivers bullets at blistering speeds.

Performance

The 6.5 Creedmoor will outperform the .25-06 past the 500-yard mark due to its better-developed ballistic coefficients. Arguably, however, any shot longer than 500 yards for the average hunter could be considered unethical.

The .25-06 is a flat-shooting, low-recoil and deadly accurate deer load.

The .25-06 will make all other calibers of rifles, including the 6.5 Creedmoor, blush with the numbers it produces out to 400 yards. It’s a speed demon and will deliver a 115-grain Nosler Partition bullet in a Federal factory load at 3,030 feet per second out of the muzzle. The same load sighted-in at 200 yards is 1.5 inches high at 100 yards, 6.8 inches low at 300 and 20 inches low at 400. If you go with a slightly lighter bullet, the numbers get even more impressive.

“I upgraded to a Hogue stock and put a Steiner 3x15x56 scope on my .25-06,” Shell said, “It’s my ‘go-to’ gun. It shoots a Federal Premium 117-grain BTSP extremely well. I guess that over the years, I have killed two or three hundred deer and hogs, combined, with it — plus a few coyotes.”

The .25-06 cartridge is not a magnum load, but it delivers bullets at blistering speeds. Shown here are the 7mm Mag (right), the .25-06 (center) and .22-250 (left)

The biggest downfall to the .25-06’s performance would be that it doesn’t hold its accuracy in rifles with shorter barrels. For optimal accuracy, choose a rifle with a barrel at least 26 inches long. Anyone who loads their own cartridges needs to know that it also needs a slower-burning powder for optimum accuracy. Factory loads already have this in consideration.

Numerous Uses

The .25-06 has been used to harvest every known  big-game animal in North America, including grizzly bear. It’s a little too much gun for squirrel and ground hog-sized critters and really not the best choice for elk or bear. It’s absolutely lethal on deer, hogs and coyotes in the hands of a southern hunter.

Available loads

The most-popular companies producing loads for the .25-06 are Barnes, Nosler, Federal, Remington, Winchester and Hornady. Reloading supplies are plentiful, too. The best-killing bullets for the .25-06 are the Nosler Partition, Swift A-frame, and Barnes TTSX. A Nosler Partition bullet in .25-06 traveling around 3,000 fps is devastating to a whitetail.

Last word

Matt Shell of Brookhaven will choose a .25-06 every time. He whacked this 308-pound hog with his Remington 700 in .25-06.

The old quarter-bore is largely overlooked and forgotten by many hunters today. If you are considering a new deer rifle, find someone who owns one and talk to them about it.

“I have access to plenty of other guns: 7 Mags, .30-06s, .270s and more,” Shell said. “But I will grab the .25-06 every time; I know what it will do, and I have that much confidence in it.”

This traditional deer rifle is quick and flat-shooting with low recoil. It’s very attractive when you take a hard look at it. When it comes to deer rifles, it really is the total package.

 

JOIN THE CLUB, get unlimited access for $2.99/month

Become the most informed Sportsman you know, with a membership to the Mississippi Sportsman Magazine and MS-Sportsman.com.

Andy Douglas
About Andy Douglas 28 Articles
Andy Douglas is an outdoor writer and photographer from Brookhaven. A native of Lincoln County, he’s chased deer, turkeys, bass and most anything else the past 35 years. He lives the outdoor lifestyle and is passionate about sharing that with others through stories and photos.

Be the first to comment

Leave a Reply