A better anchor

Tethering your boat to stumps makes for stress-free crappie fishing.

Although bream fanatic Lyle Soileau definitely uses a standard anchor, he also has another tool to help hold his pontoon boat in place when fishing snag-filled flats.

It’s a length of electrical conduit through which a rope is looped. It looks for all the world like one of those contraptions animal-control officers use to capture snarling dogs while keeping them at a distance.

Once he sets his bottom anchor, Soileau can loop the rope around any nearby stump off the other end of the boat and hold his fishing platform firmly in place — even if the wind is blowing.

And it’s easy to make.

Soileau uses the conduit instead of PVC for a simple reason.

“The key is you can’t use PVC, which will shatter,” he said. “You’ve got to use electrical conduit.”

His choice is 3/4-inch conduit with an end cape.

First, he drills holes through the conduit just below the end cap and feeds his line through both holes, tying a knot to the end of the rope.

Another hole is drilled through the end cap, and the other end of the line is fed through that hole so it snakes all the way through the 4 feet of conduit.

The line can then be fed out to form a loop; just make the loop, swing it over a stump and pull the loop tight.

“No more bending over and grabbing a stump,” Soileau said.

He keeps two in his boat so that he can use stumps instead of traditional anchors when fishing particulalry stump-ridden areas.

“Sometimes we want to tie off in the front and then tie on the back to position the boat,” Soileau said.

About Andy Crawford 279 Articles
Andy Crawford has spent nearly his entire career writing about and photographing Louisiana’s hunting and fishing community. While he has written for national publications, even spending four years as a senior writer for B.A.S.S., Crawford never strayed far from the pages of Louisiana Sportsman. Learn more about his work at www.AndyCrawford.Photography.

Be the first to comment

Leave a Reply